Top 7 INCRA Router Table UK – DIY & Tools

As an Amazon Associate I earn from qualifying purchases.

1. Incra


Incra WONDERFENCE37 Wonder Fence Router Table Fence

Incra #ad - All critical surfaces machined are perfectly flat. Includes a hi-rise 4 1/2-inch fence cap for vertical panel raising and tall boards. Includes incra TS-III table saw fence. Produces perfect box joints and dovetails in all styles. Heavy-duty, one-fence solution for all of your router table operations.
BrandIncra #ad
ManufacturerIncra #ad

2. Namvo


Aluminum Router Table Insert Plate, Trim Router Table Plate Woodworking Flip Trimming Board with 2 Aluminum Rings and Install Screws for Woodworking Bench Hole spacing: 70 x 60 mm, Red

Namvo #ad - Convenient center hole bushing for aligning router router with drill center. The hole distance is 70 x 62mm which is convenient to install and remove.

The table's insert plate makes precise drilling and installation of any router planer easy. The aluminum router table is made of aluminum alloy including positioning ring, which is durable and not easily damaged. Easy to operate, save labor and effort, at the same time easy to operate and expand the use of trimming machine. Router table insert plate It is easy to operate, saves effort and expands the use of pruning machines at the same time.
BrandNamvo #ad
ManufacturerNamvo #ad

3. Trend


240 Volt, Trend WRT Workshop Router Table

Trend #ad - 98mm aperture diameter: for cutters up to 86mm diameter; Ideal for use with wide panel raising and joint making cutters; Reducing rings supplied for safe use with smaller diameter cutters. Adaptable: a perfect match to the trend 1/4in or 1/2in routers, the aluminium insert plate has adjusting screws for perfect tabletop alignment, and easily fit to many others, allowing the work to pass over without hinderance for perfect results.

Includes: 2 x insert rings; 1 x leg stand; no-volt release switch; Side pressure; Top pressure; Mitre Fence; Lead-on pin; Safety guard; Push stick; 2 x insert rings. Smooth and easy movement: laminated table and fence cheeks ensures the work runs freely and smoothly; Twin measuring scales in the table allow easy, repeatable fence positioning for grooving and rebating applications.

Twin ‘t’ slot extrusions: allows quick adjustment and removal of the fence for multi-function adaptability including grooving, moulding, jointing and also curved work using the supplied lead on pin.
BrandTrend #ad
ManufacturerTrend #ad
Height72 cm (28.35 Inches)
Length19 cm (7.48 Inches)
Weight27.5 kg (60.63 Pounds)
Width93 cm (36.61 Inches)
Part NumberWRT

4. Incra


INCRA Mast-R-Lift-II Router Lift

Incra #ad - Ultra-responsive, direct drive 16TPI lift screw mechanism. 9-1/4-inch x 11-3/4-inch x 3/8-inch plate size is compatible with all INCRA Router Tables and fits some other brands. Patented thread tensioning system eliminates vertical lash in the lift mechanism. Quickly make super precise, 0001-inch height adjustments from above. Exclusive incra magnalock reducing ring system 3/8-inch, 2-5/8-Inch, 1-inch, 1-5/8-Inch, 3-5/8-Inch for instant ring changes and perfect ring fit. Exclusive ball bearing mechanism for super smooth action and low friction. Change router bits from the top of the table.
BrandIncra #ad
ManufacturerIncra #ad
Height22.86 cm (9 Inches)
Length30.48 cm (12 Inches)
Weight5 kg (11.02 Pounds)
Width25.4 cm (10 Inches)
Part NumberINCRA Mast-R-Lift-II
ModelINCRA Mast-R-Lift-II

5. Trend


Furniture, Shaping and Moulding Applications, 240 V, Trend CRT/MK3 Craft Pro Router Table for Joinery

Trend #ad - Includes: crt/mk3; 2 x insert rings; 1 x no-volt release switch; 1 x Side pressure; 1 x Top pressure; 1 x Mitre fence; 1 x Lead-on pin; 1 x Safety guard; 1 x Pushstick.

Specifications: table top – 610x405x26mm; bench height – 410mm; router cutter aperture – 98mm; max cutter dia – 86mm; Insert rings– 31. 8mm, 67. 5mm; backfence height – 68mm; dust spout aperture – 57mm; Edge planing up to – 1. 4 and 2. 4mm. Quick release backfence: Extruded aluminium with adjustable MDF cheeks and edge planing facility. Adaptable and adjustable: high back fence with fully adjustable guard assembly; Includes hole for T11 fine height adjuster; Removable 6. 35mm thick aluminium insert plate with 98mm diameter aperture, pre-drilled for Trend TBC routers and T11 routers. Aluminum plate: 6. 35mm thick with levelling facility and lead-on pin.
BrandTrend #ad
ManufacturerTrend #ad
Height40.8 cm (16.06 Inches)
Length13.5 cm (5.31 Inches)
Width73 cm (28.74 Inches)
Part NumberCRT/MK3

6. Trend


Trend Snappy Micro Bit Holder 150X108mm

Trend #ad - Three hole sizes of 98mm, 68mm & 32mm diameter. Two concentric snap-in insert rings. Thickness of 6. 35mm to reduce cutter height loss. A large rigid aluminium router table insert plate for incorporation into user-made router tables. Can be mounted to 19mm tops with edge rebate of 8mm deep x 12. 7mm wide.
BrandTrend #ad
ManufacturerTrend #ad
Height2 cm (0.79 Inches)
Length31.9 cm (12.56 Inches)
Width43.8 cm (17.24 Inches)
Part NumberRTI/PLATE/A

7. Incra


INCRA I-Box Jig for Box Joints

Incra #ad - At the same time, it's easy to use and the included 1 hour instructional DVD covers everything from basic setup to advanced decorative joinery.

To get right to the point, the new Incra I-Box is the most advanced tool ever produced. Its revolutionary design allows faster setup, greater versatility, and improved user safety compared to traditional jigs. International products have separate terms, including fit, and language of product, age ratings, are sold from abroad and may differ from local products, labeling or instructions. Use it on your table saw or router table to cut great looking box joints.
BrandIncra #ad
ManufacturerIncra #ad
Height10.16 cm (4 Inches)
Length53.34 cm (21 Inches)
Weight3.24 kg (7.14 Pounds)
Width38.1 cm (15 Inches)
Part NumberIBOX